JCBL100-1600 Type 5 LAYER CORRUGATOR LINE
(Design Speed :100m/min Working Speed: 80m/min)
JCBL100-1600 Type 5 LAYER CORRUGATOR LINE
Model | Name | QTY | Feature |
RS200 | Electrical Mill Roll Stand ( with trolley and track)
| 5 | Toothed chuck,manual discbrakes,pneumatic mechanically actuated lift,panning left and right on the middleGuide rail length is 4500 mm, the car uses 10 mm plate welding |
PH-1- 600 | Pre-heater | 4 | The roller ¢600 mm, including the pressure vessel certificate; electric adjustment angle; angle can be adjusted within the range of 360 ° |
SF280 | Fingerless Single Facer | 1 | Corrugated diameter is 280mm, 48CrMo high quality alloy steel,playing chromed; Adopt independent gearbox, universal joint drive structure |
SF280S | Fingerless Single Facer | 1 | Corrugated diameter is 280mm, 48CrMo high quality alloy steel,playing chromed; Adopt independent gearbox, universal joint drive structure, Roller easy change, air bag pressure. |
PH-3-600 | Triplex Pre-heater | 1 | The roller ¢600 mm, including the pressure vessel certificate; electric adjustment angle; angle can be adjusted within the range of 360 ° |
GM269 | Double Gluer machine | 1 | Glue roller dia. Is 269mm,carved 25 line pit type checker;Each layer of the independent variable frequency motor drive, glue amount controlled by PLC and man-machine interface; Glue quantity of digital display. |
BCM | Duplex Conveying Bridge | 1
| Main girer is 200mm box iron,independent frequency conversion motor drive paper transport, adsorption tension. Electric correction. |
DFM12 | Double Facer | 1 | Hot plate 600 mm * 12pcs; press rollers lift by pneumatic,compressed press rollers structure |
SS120 | Electric Slitter Scorer | 1 | Blade adjust by electric,5 blade 8 line,Adopt tungsten carbide knives |
NC-120 | NC Cut-Off | 1 | Full AC servo control, braking is energy storage type, stright cutter structure, oil-immersed gear transmission, a 10.4 -inch touch screen display. |
ST-SD | Sheet Delivery Machine | 1 | Electrical adjust the size of cardboard,cardboard transverse output controlled by pneumatic,automatic count the number. |
ZJZ | Glue Making System | 1 | Customer supply |
ZA | Internal Steam System | 1 | Steam system components adopt GB valva; Contains rotary joint, up and down distributor , drain valve,steam trap and pressure gauge, etc.; Boiler and piping supply by customer |
MAIN SPECIFICATION
MODEL: JCBL100-1600-5 LAYER CORRUGATOR LINE
1. Manufacture width: 1600mm
2. Design speed: 100m/min Working speed:80m/min
3. Note: The roll paper which is used to test the production speed should meet following requirements:
*Grade: Min. B * Moisture content: 11% ± 2%
*Face paper: 100~250g/m2 * Liner paper: 100~150g/m2
* Corrugated paper: 100- 200g/m2
4. Flute profiles: B,C ,E flute(as per clients request)
5. Steam requirements
Steam consumption:2500kg/h Air compressor pressure:0.8~1.1Mpa
6. Electricity: 380V, 50Hz,three-phase four wire type
7. Equipment Direction:Left or Right transmission will be according to client’s requirements.
8. Factory request size:specific length as to the foundation of drawing
BUYER SUPPLY PART
1.Air compressor , air pipe line and glue pipeline.
2.Main power, electric wire from operate box to main power.
3.Water supply, pipeline and barrel.
4.Water, electric and gas, main ground foundation.
5.Test machine use Raw materials ( paper roll, corn starch, caustic soda, sodium borax) to test machinery.
6.Machine use oil, lubricate oil and high temperature lubricate oil.
7.Installing engineer’s food, hotel and supply enough workers to help installing and test machine.
8.Boiler 4T supply by customer and the pressure 1.25Mpa and the working pressure is
0.8~1.1Mpa.